Design Considerations
The 639 Series Valve is designed as a panel mount diverter valve.
The middle port is common. The 90 degree handle rotation directs the flow to the open port, shutting off the other port completely.
The handle can be orientated in four positions and can be installed or removed while the valve is under pressure.
The panel mount requires a 0.750"hole through a maximum panel thickness of 0.170".
Two of the four available screw boss locations will secure the valve.
Panel mount screws are not supplied.
Specifications
Material Options | Black Filled Polypropylene Body and Ends Makroblend® Ball |
End Options | 1/8"Male NPT, 1/4"Male NPT, 3/8"Male NPT 1/8"Female NPT, 3/8"Female NPT, 1/2"Female NPT 1/8"Barb, 1/4"Barb, 3/8"Barb, 1/2"Barb Tapered Barb 1/4"Push-To-Connect, 3/8"Push-To-Connect 1/4"JACO, 3/8"JACO |
Seal Options | Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®) |
Handle Options | Blue ABS (Standard) Black White Red No Handle |
Ball Through Hole Diameter | 0.375" |
Maximum Operating Pressure | 125 PSI |
Maximum Operating Temperature | 140 °F |
CONTACT US FOR MORE INFORMATION
Comments