Design Considerations
The bottom port is common and the 351 Series can be used as a diverter, selecting, or mixing valve.
The handle has 90 degree rotation and lies at 45 degrees towards the open port, while the other side port is shut off completely.
When the handle is rotated 45 degrees from either port, there is partial flow to both ports.
There is no point in the handle rotation where flow is shut off to both ports at the same time.
Gray PVC is the standard material and is an NSF Standard 61 Approved Material.
The Lever Handle is standard with an optional Mini-T Handle or Round Handle available.
Specifications
Material Options | Body, Ends, Ball and Handle - Gray PVC (Standard), White Polypropylene, Gray Polypropylene Screws - Stainless |
Botton (Inlet) End Options | 1/4"Female NPT, 1/2"Female NPT 1/2"Male NPT , 3/4"Male NPT 3/8"Barb , 1/2"Barb , 5/8"Barb 1/2"Socket , 3/4"Socket |
Side (Outlet) End Options | 1/4"Female NPT, 1/2"Female NPT, 3/4"Female NPT 1/2"Male NPT, 3/4"Male NPT 3/8"Barb, 1/2"Barb, 5/8"Barb, 3/4"Barb 1/2"BIB (Smooth Barb) 1/2"Socket, 3/4"Socket |
Seal Options | Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®) |
Handle Options | Lever Handle (Standard) Mini-T Handle Round Handle Extended Handle - 1"Offset |
Miscellaneous Options | Stainless Support Ring for 1/2"and 3/4"FNPT Stainless Mounting Bracket |
Ball Through Hole Diameter | 0.437" |
Maximum Operating Pressure | 125 PSI |
Maximum Operating Temperature | 140 °F |
CONTACT US FOR MORE INFORMATION
Comments