Design Considerations
The bottom port is common and the 350 Series can be used as a diverter or selecting valve.
The handle has 180 degree rotation and lies over the open port.
When the handle is rotated 90 degrees from either port, flow is shut off to both ports.
Gray PVC is the standard material and is an NSF Standard 61 Approved Material.
The Lever Handle is standard with an optional Mini-T Handle or Round Handle available.
Specifications
Material Options | Body, Ends, Ball and Handle - Gray PVC (Standard), White Polypropylene, Gray Polypropylene Screws - Stainless |
Bottom (Inlet) End Options | 1/4"Female NPT, 1/2"Female NPT 1/2"Socket, 3/4"Socket 1/2"Male NPT, 3/4"Male NPT 1/2"FNPT Stainless Support Ring 3/8"Barb, 1/2"Barb, 5/8"Barb, 3/4"Barb |
Side (Outlet) End Options | 1/4"Female NPT, 1/2"Female NPT, 3/4"Female NPT 1/2"Male NPT, 3/4"Male NPT 3/8"Barb, 1/2"Barb, 5/8"Barb, 3/4"Barb 1/2"BIB (Smooth Barb) 1/2"Socket, 3/4"Socket 1/2"FNPT Stainless Support Rings, 3/4"FNPT Stainless Support Rings |
Seal Options | Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®) |
Handle Options | Lever Handle (Standard) Mini-T Handle Round Handle 1.0"Offset Extended Handle |
Ball Through Hole Diameter | 0.437" |
Maximum Operating Pressure | 125 PSI |
Maximum Operating Temperature | 140 °F |
CONTACT US FOR MORE INFORMATION
Comments